TRUCK RECEIVER HITCH SPARE SWING AWAY SPARE TIRE MOUNT

Question

Q: want more info on the hitch spare tire mount. Also can it open to the left vs the right?

Asked by: Louis Wolfson - 8/29/2022

Submit an answer

Q: My spare tire is 7 inches from the wheel hub to the outside of the tire. Will my tire fit on the mount? If not, do you have any mounts that will fit this tire?

Asked by: Larry - 6/7/2022

Submit an answer

Q: Concerning the U-4100-S2 swing-away spare tire mount 1. What are its dimensions? 2. How much does it weigh? 3. Do you know whether it will fit a 2009 Honda CR-V? Thanks.

Asked by: Lee Sarver - 9/2/2022

Submit an answer

Q: Follow-up concerning the U4100S2 swing-away spare tire mount 4. Will it support a 225/65R17 102T tire?

Asked by: Lee Sarver - 9/2/2022

Submit an answer

Q: What are the dimensions?

Asked by: SRG - 10/25/2022

Submit an answer

Q: On the swing away that I purchased last April, the plastic headed nut that you screw on by hand that helps secure/stabilize the hitch is cracking. Possibly over tightened, but was wondering about a replacement? Are they available? Thanks

Asked by: James E Smith - 11/15/2022

Submit an answer

Q: what is the weight capacity of this

Asked by: josh - 2/8/2023

Submit an answer

Q: How tall is the mount? It looks like it rides low? is it adjustable in height?

Asked by: Burke Kline - 4/6/2023

Submit an answer

Q: Will this fit the back of a Tesla Model Y? Thinking of getting a spare tire and would like to hitch the spare tire to this swing away mount.

Asked by: Chinh Pham - 5/8/2023

Submit an answer

Q: When this product (U-4100S) is mounted on my hitch receiver, can I still also tow a trailer? My vehicle is a 2008 Porsche Cayenne (base model) with towing capacity of 7,700 lbs. I understand that my tongue weight capacity may be reduce when this product is mounted. Thanks!

Asked by: Carey - 5/12/2023

Submit an answer

Q: Could i get the dimensions of each part? The reason i am asking is, i want to make sure it doesn't block the camera on the factory tail gate of a 2022 Hyundai Santa Cruz Truck. From the center of the hitch to camera i have 32 inches, plus i am putting a full size spare tire on the bracket which is almost 29 inches

Asked by: Phil Jurak - 5/16/2023

No Answers have been submitted yet.

Submit an answer

Q: Hi I have a 2018 Toyota Sienna Awd and I would like to know if I can use the U-4100s spare tire mount on my vehicle.

Asked by: Roberto - 10/1/2023

Submit an answer

Q: Measurements please from the center of the hitch to the center of the tire upright when swung out. And the height from the bottom of the hitch to top of the swing arm. Thank you.

Asked by: Mark - 1/7/2024

Submit an answer

Q: What size hitch does that slide into? I have a small one on my GMC Terrain

Asked by: Hunter W Goodnight - 1/9/2024

Submit an answer

Q: can this swing to the left side?

Asked by: Stony - 2/12/2024

Submit an answer

Questions about this item? Ask here.

Accepted Answer

A: Yes it can swing in either direction. Just flip the swing on the lower mount to accommodate which direction you want it to swing.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/29/2024)

Accepted Answer

A: Yes this will fit your wheel. The distance from the mounting plate to the vertical is 8.5". The plate itself will accommodate 4.5"-7.5" hole pattern spread.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/29/2024)

Accepted Answer

Please see the overall dimensions in the description. It weighs roughly 40 lbs. As far as fitment to your CRV, it depends on your receiver. There is 3 different sizes. 1.25", 2" and 2.5". Standard is 2" which this fits. If you have a smaller 1.25" receiver we have an adapter to bring that to 2". That would be product # U-4053. The 2.5" is a new receiver that is on the newer large trucks that we make an adapter for but not needed for your application.

Accepted Answer

A: Yes it will fit your tire.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/29/2024)

Accepted Answer

A: Please see the product description for the overall dimensions. The mount will hold any wheel pattern between 4"-7.5". Most hole patterns are in the range of 4.5-5.5".

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/29/2024)

Accepted Answer

A: By plastic nut I assume you mean the 5/8" nylock. There is no need to over tighten nylocks. I can send you one if you need but any hardware store will have them. 5/8"-11

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/26/2024)

Accepted Answer

A: This is made out of heavy wall steel and the bolts are 5/8" grade 8 so there should be no problem holding your wheel/tire.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/26/2024)

Accepted Answer

A: From the center of the receiver hole to the center of the wheel is 29.5". Can be adjusted to 28" at the lowest point.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/26/2024)

Accepted Answer

A: Yes this will fit just fine. Check your hitch receiver to see what size it is. 2" is standard which is what this swing away fits. But if it is smaller then it is 1.25" which we have an adapter for that (U-4053).

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/26/2024)

Accepted Answer

When the swing away is attached you will not have the ability to tow a trailer as is but we do offer an option that will allow you to do that. U-4052 is what we call a "piggyback". Allows you to tow AND have a hitch spare tire mount.

https://www.shophornetoutdoors.com/ATVUTV-Receiver-Hitch-Extender-Piggyback-Dual-Receiver-fits-2-Receivers_p_99.html

Accepted Answer

A: Yes. If it is a 2" receiver your are good. If it is 2.5" receiver which is a newer thing but we have an adapter sleeve (U-4054) that will bring it to 2".

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/26/2024)

Accepted Answer

Center of the hitch hole to the vertical tire mount hole is 43.25" when swung out.
Center of the hitch hole to the center of the wheel is 29.5" vertically.
Center of the hitch hole to top of vertical mount is 33.5"
Overall height of entire assembly is 35.5"

Hope this helps. I will be adding more dimensional drawings to the site soon to help.

Accepted Answer

This fits a 2" hitch receiver. We have adapters for 1.25" and 2.5" receivers. Those will bring whatever you have to 2". Standard is 2" on most vehicles but some trucks have gone to 2.5" which would be product number U-4054 to bring it to 2" standard.

https://www.shophornetoutdoors.com/Receiver-Hitch-Adapter-2-12-to-2-Flush-Mount_p_392.html

The 1.25" receiver converting to 2" is U-4053.

https://www.shophornetoutdoors.com/Receiver-Hitch-Adapter-1-14-inch-to-2-inch-receiver-adapter-fits-1-14-Receivers_p_98.html

Accepted Answer

A: Yes the swing away can be used to swing either way. The swing away is put together in multiple parts to make it versatile. Comes with hitch stabilizers for each connecting part to keep from rattling.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/26/2024)

TRUCK RECEIVER HITCH SPARE SWING AWAY SPARE TIRE MOUNT

Choose Options

Average Customer Ratings

Related Items

Accessories