UTV Chainsaw Mount for 1.5" to 2" Round Roll Bars -RCM-3012 Made in USA - Fits Polaris Ranger, RZR, Can-Am, Kawasaki, Yamaha - Heavy Duty HDPE Sheath with Anti-Rattle T-Knobs - Secure Off-Road Storage

Question

Q: UTV Roll Bar Universal Chainsaw Mount RCM-3012 Have you fitted this on a '19 Wolverine X4? I'm wondering if I have enough straight bar to mount vertically, either behind front seat, between doors or on the rear most bar. Don't really want it high so it's easily accessible. What is the spread between mounting holes (looks like it might be variable)? Thanks.

Asked by: Gary Fanning - 10/15/2019

Submit an answer

Q: I lost 2 of the fastening screws for the roll bar bracket. Can you tell me what the spec for those socket head cap screws?

Asked by: Jason - 10/21/2019

Submit an answer

Q: UTV Roll Bar Universal Chainsaw Mount RCM-3012 Have you fitted this on a '19 Wolverine X4? I'm wondering if I have enough straight bar to mount vertically, either behind front seat, between doors or on the rear most bar. Don't really want it high so it's easily accessible. What is the spread between mounting holes (looks like it might be variable)? Thanks.

Asked by: Gary Fanning - 10/15/2019

Submit an answer

Q: Hello, I have ordered one of RCM-3012. looking forward to get it! I was just wondering if the hardware (bolts&nuts) were metric or imperial sizes? If imperial what size wrench do I need to plan for? Thanks

Asked by: Frank Switzerland - 10/28/2019

Submit an answer

Q: UTV Roll Bar Universal Chainsaw Mount RCM-3012 Have you fitted this on a '19 Wolverine X4? I'm wondering if I have enough straight bar to mount vertically, either behind front seat, between doors or on the rear most bar. Don't really want it high so it's easily accessible. What is the spread between mounting holes (looks like it might be variable)? Thanks.

Asked by: Gary Fanning - 10/15/2019

Submit an answer

Q: Will this mount work on a 2015 Polaris RAZR 900?

Asked by: Kathy Wright - 9/24/2021

Submit an answer

Q: Will this fit on the back roll bar of a 2022 Yamaha Wolverine Rmax4? It seems as the seat belt mounts may be in the way with the spread of the mounts of the chainsaw holder?

Asked by: Laura - 4/7/2024

No Answers have been submitted yet.

Submit an answer

Q: Hello, I’m thinking of adapting this to the rear tubing on my Jeep’s tire carrier that is 2” in diameter. I’ve already mounted a 5lbs propane tank with an RV Mount, so am used to making parts work for different end results than they may have been intended. I was wondering how thick the casing of the scabbard is (outer dimensions). The reason being if I mounted between the tire carrier and hatch, or just on the outside of the hatch. If you’d be able to get out dimensions of the scabbard piece without taking into account the sample, I’d really appreciate it! If not, I get that it’s a weird ask and will try to figure out if it would work from the other images you have. Cheers, Sean

Asked by: Sean Taylor - 8/4/2024

No Answers have been submitted yet.

Submit an answer

Q: Hello. I am seeing conflicting information on tube mounting size. Is it 1-2 inch or 1 1/2 - 2 inch? Thank you.

Asked by: Stanton B. Seitz - 11/20/2025

No Answers have been submitted yet.

Submit an answer

Questions about this item? Ask here.

Accepted Answer

The spread on the mounts is 9.75". There are holes at 3" and 6" so you could put them closer together if necessary. In that case you would need to install 1/4" bolts that are 1" longer but it will work. The picture on the site show it mounted on a 2016 Wolverine (mine) at the 9.75" hole spread and I had no problem mounting it there.

Accepted Answer

A: The cap screws are 5mmx17mm. Local hardware store should have them; if not just let us know.

Was this answer helpful? 4 of 4 Customer(s) found this Answer helpful.

Answer provided by: Camotom (10/21/2019)

Accepted Answer

A: Unfortunately, mounting where you did on your Wolverine X2 would render the back door of an X4 unusable. Still scratching my head. I carry a chainsaw everywhere for trail access and recovery.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Gary D Fanning (11/2/2019)

Accepted Answer

A: They are standard SAE Bolts. 7/16" wrench.

Was this answer helpful? 1 of 2 Customer(s) found this Answer helpful.

Answer provided by: camotom (10/29/2019)

Accepted Answer

A: The Mount can be installed vertically or at an angle so mounting it vertically won't pose any interference if you have an X4.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Camotom (4/28/2021)

Accepted Answer

A: For the X4 rear (or behind the front seat) I'd need a mount for 1.5" bar instead of 2" on sides.

Was this answer helpful? 0 of 2 Customer(s) found this Answer helpful.

Answer provided by: Gary D Fanning (11/2/2019)

Accepted Answer

A: If you are mounting it in your Roll Cage then yes it will fit. This mount fits Round pipe or tube up to 2” in diameter.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Camotom (9/24/2021)

UTV Chainsaw Mount for 1.5" to 2" Round Roll Bars -RCM-3012 Made in USA - Fits Polaris Ranger, RZR, Can-Am, Kawasaki, Yamaha - Heavy Duty HDPE Sheath with Anti-Rattle T-Knobs - Secure Off-Road Storage

Choose Options

Average Customer Ratings

Related Items