Q: will this U-4047s fit or work on 2017 POLARIS General. Thanks
A: It will fit your 2" receiver of course but you'll want to measure the distance between your receiver hitch pin hole on your General to the back of your bed or bumper an compare that to the dimensions show on the photos for that product to confirm clearance. You might also take a look at the U-4048S. It has the same clearance dimension but mounts the wheel straight vertical.
Q: Would this work for an suv like a 4Runner ? Or is it just for atv’s and stuff
A: For a 4Runner I would suggest the U-4100S. The U-4047S has a curved lower for UTV's and the weight capacity on the 4100S is much higher.
Q: Can this be used on a car with a class 2 reciever?
A: Assuming your receiver is 2" yes; we have many different hitches that will work
Q: Does this work with a 1 1/4 hitch on a Polaris RZRs 900 s
A: Your RZR came stock with a 1 1/4" receiver. If you have installed a 2" receiver then it will fit. You will want to measure the distance from the center of your hitch pin to the back of your bed/bumper to confirm which length you need.
If you have not installed a 2" receiver then you would first need to purchase a converter that will convert you 1 1/4" to 2" receiver and then purchase our Scorpion U-4047 S but I would not suggest that. The combination of of 1 1/4" converter and the U-4047 S will add too much length and it will put unnecessary torque on the receiver on the RZR. If you'd like to try it of course, Hornet products can be returned for a full refund.
The U-4063 might be a good solution for you. Although it is not a fold down hitch, it has 2 components so you can simply pull the pin on the wheel holder and lift it off the hitch.
Q: What is the weight capacity we have a RV and a spare tire bike rack we want to use on the spare once it mounted on the back of the RV’s 2” receiver.
A: The weight capacity is 75 lbs. However the Truck scorpion swing away is 150 lbs.
Q: Looking for a swing away spare tire carrier that will work with my Promaster 3500 RV, Thor Sequence. ( Same as Travato) do you have one?
A: The U-4800 would likely be your best solution. In the description for the hitch products there is a link you can click that shows dimensions of each product. You will want to measure to make sure you get the one that best clears your rear bumper. There are several other good heavy duty mounts that can also work for you.