Q: What is the weight rating of the drawer slides?

Asked by: Carl - 3/21/2024
A: Weight is 40 lbs
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Tom (3/22/2024)
A: 70 lbs
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Tom (3/22/2024)
Submit an answer

Q: what is the maximum height will the items fit in the drawers...is it about 5"-inches based that the draw height is 6"-inches. Can you please find out for me....thank you! Jim

Asked by: Jim - 5/21/2023
No Answers have been submitted yet.
Submit an answer

Q: What size is it, or the size it comes in

Asked by: Blake - 6/19/2023
No Answers have been submitted yet.
Submit an answer

Q: Can the slide outs be operated with an electric type release button similar to a gun rack in a police patrol vehicle?

Asked by: Paul Stein - 2/17/2024
A: Keyed Locks are used. Each Drawer has a lock set in the face plate so if you can find a lock that will fit and function similarly you could likely modify it.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/22/2024)
Submit an answer

Q: What is the full inside length of the drawers?

Asked by: Jim Erickson - 3/12/2024
No Answers have been submitted yet.
Submit an answer

Q: Do you know the rough cost of duty shipping to Canada for this unit?

Asked by: Jim Erickson - 3/12/2024
No Answers have been submitted yet.
Submit an answer

Q: Can you please provide the complete interior & exterior dimensions along with the weight?

Asked by: Anthony - 3/22/2024
No Answers have been submitted yet.
Submit an answer

Q: How does the aluminum slide out drawers mount to the UTV bed?

Asked by: Jason Gibbs - 4/5/2024
No Answers have been submitted yet.
Submit an answer

Q: What are the dimensions? I have a camper that will be mounted on top of the diamond plate. How much weight can it handle. Can I use the trucks tie downs on the corners. I have a 2024 Chevy Trail boss 1500. Planning on putting a Scout camper that weights @ 900lbs.

Asked by: Skip - 6/11/2024
No Answers have been submitted yet.
Submit an answer

Q: Are your aluminum slideout drawers water and dust proof? Can I order a custom size? Thanks.

Asked by: Cameron - 7/21/2024
No Answers have been submitted yet.
Submit an answer

Q: Can I mount a 300 pound plus tool box to the top of this ?

Asked by: Jacob R Starks - 9/25/2024
No Answers have been submitted yet.
Submit an answer

Q: Does this fill the entire back of the utv? I didn’t see the measurements?

Asked by: Kevin Landers - 12/12/2024
No Answers have been submitted yet.
Submit an answer

Q: Will this fit a 2022 CF Moto UForce 600?

Asked by: Bob Britten - 12/26/2024
No Answers have been submitted yet.
Submit an answer

Q: Hello! How wide is each dawer? This is sold as a complete unit Housing and dawer assembly? Thanks! Larry

Asked by: Larry Harper - 1/11/2025
No Answers have been submitted yet.
Submit an answer

Q: Hello Is your storage unit water tight ? What is the deepest your boxes go to ? Thanks

Asked by: Nick Genese - 2/28/2025
No Answers have been submitted yet.
Submit an answer

Q: Will this box fit in the cargo bed of a 2023 Polaris Ranger XP1000. what are the exact dimensions of the box. Thank you

Asked by: Paul Stein - 4/3/2025
No Answers have been submitted yet.
Submit an answer

Q: Is this waterproof?

Asked by: Jeremy Franks - 5/22/2025
No Answers have been submitted yet.
Submit an answer

Q: What are the total measurements front to back and side to side?

Asked by: LC - 11/5/2025
No Answers have been submitted yet.
Submit an answer

Q: Inside dimensions of draw

Asked by: scott meister - 12/31/2025
No Answers have been submitted yet.
Submit an answer

Q: Hi, I'm looking to need roughly 4000-5000 units of the slide out draw system over 2 years. would you sell me additional draws so i can replace them as they break or as my electric units inside them break. I want to be able to swap out a draw and get the truck back up and running with under 15- minute time frame and swap out draws is the way to go. refurbish the broken parts and then have that box ready to go when the next customer needs it. My business model relies on having additional draws in stock. my number is 929-318-1291 if you want to call me directly to discuss.

Asked by: robert - 4/9/2026
No Answers have been submitted yet.
Submit an answer

Q: Where are they manufactured at? How do you install them or hold them down? Are there any gaps around the box between the box and the bed sides. What’s the total height of the box and what’s the total Sq ft of both drawers together. What the height of the drawer itself? Warranty? Thank you.

Asked by: Shivedog - 4/16/2026
No Answers have been submitted yet.
Submit an answer

Q: is the system waterproof???

Asked by: alexander dunigan - 5/20/2026
No Answers have been submitted yet.
Submit an answer

Q: Do you do custom size boxes looking for a box size that I am wanting is 48" wide 36" Deep 9" Tall

Asked by: Wes Zehr - 6/27/2026
No Answers have been submitted yet.
Submit an answer